FORUM CLASSIFIEDS DIFFLOCK.com Links & Networks
Forum Homepage
Log in
Profile
Search
Private Messages
Forum Members
Register
Classified Ads
Search Ads
Place New Ad
My ads
Place your classified
ads here for FREE
NB: Adverts placed in the general
forum areas will be deleted
Difflock Homepage
Online Shop
Contact Us
FAQ
Calendar
Garage
Facebook
Twitter
Youtube
Advertise With Us - Reach your target market by advertising on the Difflock.com forum.
Click here or call 0845 125 9407


engine/gearbox question

 
 
Post new topic   Reply to topic    Difflock Forum Index -> Suzuki
View previous topic :: View next topic  
Author Message
nitrowing
Gate Opener


Joined: 24 Mar 2017
Odometer: 4
Location: Cleethorpes



PostPosted: Sun Mar 26, 2017 11:24 am    Post subject: engine/gearbox question Reply with quote

Hi, I've joined the forum because I've got a G10/Jimny set-up in my car and have a question that I think you guys would have more knowledge about...

My motor is a 2002 3cyl G10 and I had it mated up to a Jimny box so I could run a rear wheel drive.
The starter motor didn't line up so the bell housing was cut and the Swift starter was welded on. This worked for a couple of years with no trouble until a few weeks ago when that part of the housing destructed into a few pieces!

I bought another Jimny box but obviously the starter doesn't line up.
The guy who originally did the modification isn't available any more.

Do any of you know what gearbox will line up with the G10 block without modding?
Back to top
View user's profile Send private message
Twiss
Mud Obsessed


Joined: 18 Feb 2008
Odometer: 6438
Location: Birkirkara, Malta


1993 Suzuki Samurai

PostPosted: Tue Mar 28, 2017 1:49 am    Post subject: Reply with quote

I think you will probably be looking at a mk2 Suzuki Swift gearbox for that
__________________________________
Twiss
'95 Samurai 416 16v
'92 Maruti Gypsy MG410
www.suzukiclubuk.co.uk
Back to top
View user's profile Send private message Visit poster's website
nitrowing
Gate Opener


Joined: 24 Mar 2017
Odometer: 4
Location: Cleethorpes



PostPosted: Tue Mar 28, 2017 10:13 am    Post subject: Reply with quote

Twiss wrote:
I think you will probably be looking at a mk2 Suzuki Swift gearbox for that

That's what the G10 motor was from - I needed rear wheel drive which is why I had a Jimny box mated up.
Back to top
View user's profile Send private message
ScottieJ
Guest








PostPosted: Tue Mar 28, 2017 11:13 am    Post subject: Reply with quote

I presume you are using the early Jimny box with the G series? you could also use an sj413 or samurai gearbox.

What flywheel are you using?

If using a sj/jimny G13 flywheel (and clutch) you should be able to just use a sj/jimny starter with no mods. I presume the G10 flywheel is smaller??
Back to top
nitrowing
Gate Opener


Joined: 24 Mar 2017
Odometer: 4
Location: Cleethorpes



PostPosted: Fri Mar 31, 2017 3:19 pm    Post subject: Reply with quote

ScottieJ wrote:
I presume you are using the early Jimny box with the G series? you could also use an sj413 or samurai gearbox.

What flywheel are you using?

If using a sj/jimny G13 flywheel (and clutch) you should be able to just use a sj/jimny starter with no mods. I presume the G10 flywheel is smaller??


I have the G10 flywheel but the Jimny box doesn't work with the starter - I'm looking at the SJ413 box as the G13 engine is a direct swap for the G13 in the Swift series.
Back to top
View user's profile Send private message
ScottieJ
Guest








PostPosted: Mon Apr 03, 2017 8:19 am    Post subject: Reply with quote

here you go.

https://forum.miata.net/vb/showthread.php?t=404694&styleid=1

This should be the same for the early jimny box as they have the same bellhousing pattern as an sj box.
Back to top
nitrowing
Gate Opener


Joined: 24 Mar 2017
Odometer: 4
Location: Cleethorpes



PostPosted: Mon Apr 03, 2017 9:13 am    Post subject: Reply with quote

ScottieJ wrote:
here you go.

https://forum.miata.net/vb/showthread.php?t=404694&styleid=1

This should be the same for the early jimny box as they have the same bellhousing pattern as an sj box.


That's a fantastic find ScottieJ! Thank you Very Happy
Back to top
View user's profile Send private message
ScottieJ
Guest








PostPosted: Mon Apr 03, 2017 3:55 pm    Post subject: Reply with quote

nitrowing wrote:
ScottieJ wrote:
here you go.

https://forum.miata.net/vb/showthread.php?t=404694&styleid=1

This should be the same for the early jimny box as they have the same bellhousing pattern as an sj box.


That's a fantastic find ScottieJ! Thank you Very Happy


no worries, I think you might get away with just an sammy/jimny starter and some grinding, I've been trying to find out if the g10 flywheel is the same diameter as the g13 sammy/jimny flywheel, it's certainly thinner and runs as smaller clutch but it should still work with the sammy/jimny starter as long as the diameter is the same.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Difflock Forum Index -> Suzuki All times are GMT - 12 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot post calendar events in this forum
Oil Safe

Facebook

Service Kits

Evo Oils

Adrian Flux 2023

Join our mailing list for upcoming events, special offers, discount coupons and expert advice on the latest 4x4 products!

* indicates required





    
Powered by phpBB © phpBB Group