Seating Options!?

judderman3000 · Posted: Sun May 06, 2012 9:19 pm Post subject: Seating Options!?

Hi guys,

My Santana (410) well the seats are battered, wondering what my options are?

Is there anything that bolts straight in or am I going to be making runners from box section?

Rear seats... I have originals but they are in poor condition what else fits? Or should I get them recovered...?

big_patrol · Posted: Mon May 07, 2012 9:40 am Post subject:

Hey Jud I have got two wrangler seats in good condition if you are interested, not a straight fit but will go in. they are a good shape for a sj too.

judderman3000 · Posted: Mon May 07, 2012 10:16 am Post subject:

You know me buddy, all depends on the £££ Wink

Drop me a PM with your number its been a while!

Philpy · Posted: Mon May 07, 2012 9:35 pm Post subject:

Ive got Calibra seats in my 413, had to make brackets with box section, but wasn't to hard!
My sammi im building ive got MK6 Escort RS2000 Recaros to go in!

Toseland · Posted: Mon May 07, 2012 9:44 pm Post subject:

Swft GTi seats...

pretty much most things will fit with a bit of... persuasion, and welding.

Chris Ennis · Posted: Mon May 07, 2012 10:38 pm Post subject:

i've got mk4 escort xr3i recaro seats in my sj very comfy but not a straight bolt in job.

the nicest seats i've had were the Evo 8 recaros i put in my surf, stangely i only had to redrill a couple of holes to fit them.

its always easier if you get the seat runners with the new seats too. you have more metal to play with then.

Its been a while but IIRC sj seats are held on there runners by 4 10mm bolts but i'm sure one side is about and inch higher than the other side.

when i eventually dig my sj back out the garage your more than welcome to come and have a look, at the moment the seats are fitted but i'm not happy with them so i'll be redoing mine at some point

chris

tim123 · Posted: Fri May 11, 2012 7:40 pm Post subject:

There is a recent discussion I started regarding seats to fit in a SJ

Just called 'Suzuki seats?'

I recently fitted a pair of modern suzuki swift seats in to mine, removing swift runners and replacing with old SJ seat running gear.

Passenger seat is a little more tricky and the aim is really to get them set so you get max adjustment, especially as I am tall. So I had to set as far back as possible.

Basic tools needed, common sense and a few nuts and bolts.

Oh i removed the swift seat belts and stuck with the SJ ones bolted to chassis, as the clip on thee belt is different.

Good luck here is a photo.

muddymesser · Posted: Sat May 12, 2012 10:02 pm Post subject:

i've just bought some civic typeR seats for me sj . . . they seam fairly straight forward to fit Cool

i'll do a little write up when i fit them . . . tomorrow hopfully Cool