3 lift on the rear

david p · Guest

does anyone run a 3 inch lift on the back and 2 inch lift of the front
my back end seems alittle sagged down the back springs are only 4 years old

i fancy the extra clearance

parrotveasey81 · Posted: Sun Jun 14, 2009 7:50 pm Post subject:

a mate ran with a 4" rear and 2" front and that was fine and it made it a lot better off road

spannerman69 · Posted: Sun Jun 14, 2009 7:53 pm Post subject:

i`m running 3&2 , no problems . i used spring spacers in the back when the springs started to sag .

durknp · Posted: Sun Jun 14, 2009 7:54 pm Post subject:

ive got 3 inch all round. i used a 2 inch lift kit and then added 1 inch spacers under all the springs. it seems to work fine

waveydave · Posted: Sun Jun 14, 2009 10:06 pm Post subject:

My old disco runs 4" on the rear 3" on the front. runs fine and brings caster back in line.

There you go the secret is out.

david p · Guest

sounds a mod to add then

anyone change the rear prop to cope with a 3 inch lift.

also anyone changed the trailing arms for double cranked ones ?

david p · Guest

wizard · Posted: Mon Sep 21, 2009 6:26 am Post subject:

I have 3 inch all round and cranked rear arms.
If your rear prop has the rubber doughnut attached you will need to change it to the 200 series prop and diff flange.

wizard Twisted Evil

david p · Guest

heres mine and yes b4 someones says it yes it is rear steering on the back, tell the post man to get a move on with my double cranked trailing arm Twisted Evil