View previous topic :: View next topic |
Author |
Message |
Anthony Off-Road Guru
Joined: 05 Mar 2007 Odometer: 1640
|
Posted: Wed Mar 12, 2008 12:24 pm Post subject: 8 Stud PCD ?
|
|
|
I believe that some UNIMOG wheels have 8 stud fitting. Does any one know what the PCD is for this wheel? I have tried looking on the www. but cannot find any information about these wheels at all.
__________________________________ Anthony |
|
Back to top |
|
|
|
unimog427105 Gate Opener
Joined: 12 Mar 2008 Odometer: 13 Location: Mid Shropshire.
|
Posted: Wed Mar 12, 2008 3:31 pm Post subject:
|
|
|
275mm PCD (from the centre of stud number 1 to the centre of stud number 5) with a 221mm centre-bore.
__________________________________ www.crag-uk.org/ |
|
Back to top |
|
|
Anthony Off-Road Guru
Joined: 05 Mar 2007 Odometer: 1640
|
Posted: Wed Mar 12, 2008 4:42 pm Post subject:
|
|
|
unimog427105,
Oh well, Thank you for the image, PCD & Centre-Bore. I was looking for a 8,75" or 222 mm PCD which is the same as the Volvo TGB etc. I wanted a tubeless type but a bit wider and a little more -ive offset. I think that they are going to be just a bit elusive.
__________________________________ Anthony |
|
Back to top |
|
|
unimog427105 Gate Opener
Joined: 12 Mar 2008 Odometer: 13 Location: Mid Shropshire.
|
Posted: Wed Mar 12, 2008 5:19 pm Post subject:
|
|
|
All knave plates start off with no stud holes at ###PCD
Any good wheel maker (trucks etc) should be able to put together 16” DC rims to a knave plate @ ##mm offset for ~£100 VAT each, eBay has a few wheel makers on there who manufacture in the UK.
__________________________________ www.crag-uk.org/ |
|
Back to top |
|
|
norseman Gate Opener
Joined: 09 Aug 2007 Odometer: 20 Location: Scotland
|
Posted: Wed Mar 19, 2008 12:08 am Post subject:
|
|
|
D&S Factors Ltd, 1 Pinder Lane, Donington 01775 820309 dsfactor@global.net will make you rims any way you want to order them.
They will need to know diameter, width, how many stud holes and size of stud, what PCD, centre bore, and amount of backset (dimension from Knave to inside rim). Turn around is quite quick too.
I just had some 15 inch rims made to take 31 - 15.5x15 flotation tyres, cost me £143 each and have reinforced beads and valve guards added.
David Gudmunsen
6x6 with flotation tyres
|
|
Back to top |
|
|
Anthony Off-Road Guru
Joined: 05 Mar 2007 Odometer: 1640
|
Posted: Wed Mar 19, 2008 11:51 am Post subject:
|
|
|
That is great Dave.
I tried looking on E Bay but with out success and then trawled the WWW. Plenty of manufacturers in China. I did not try one because I had a feeling they were for trade orders and not 6 or 7 at a time.
I have two manufacturers now, this one and M J Lea.
Thank you.
PS I like the appearance of the hard top on your six wheel skid steer.
__________________________________ Anthony |
|
Back to top |
|
|
norseman Gate Opener
Joined: 09 Aug 2007 Odometer: 20 Location: Scotland
|
Posted: Wed Mar 19, 2008 12:21 pm Post subject:
|
|
|
What makes you think my Supacat is skid steer?
|
|
Back to top |
|
|
Anthony Off-Road Guru
Joined: 05 Mar 2007 Odometer: 1640
|
Posted: Wed Mar 19, 2008 1:28 pm Post subject:
|
|
|
Skid & Akerman
__________________________________ Anthony |
|
Back to top |
|
|
unimog427105 Gate Opener
Joined: 12 Mar 2008 Odometer: 13 Location: Mid Shropshire.
|
Posted: Wed Mar 19, 2008 2:51 pm Post subject:
|
|
|
contact "acwltd" (James if i recall) http://myworld.ebay.co.uk/acwltd i think his number is 01895 234252
Aspect Commercial Wheels Ltd, 12 Midas Industrial Estate, Longbridge Way, Uxbridge, Middlesex, UB8 2YT, UK
got a price of him for 11 x 20 drop centre rim to a custom offset for £187.50 each + VAT
&
11 - 20 SDC for £375.00 + VAT (3 piece split rims)
Would have used him as well for a spear wheel for my unimog however a couple of weeks after contacting him I dropped on an identical wheel to the one I have on my mog fitted with a brand new 365/80R20 XZL witch is the same tyres as on my mog for £128 on eBay! (luck)
__________________________________ www.crag-uk.org/ |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can post calendar events in this forum
|
|
|