Joined: 22 Sep 2009 Odometer: 13 Location: australia
Posted: Wed Mar 23, 2011 4:08 am Post subject: Vid Of MOG
Hi Lastest Youtube of MOG getting ready for Tuff Truck 2011 in Aussie
http://www.youtube.com/watch?v=Zkl8gT5YyLY __________________________________ There are 2 types of people in the World
Those who own a UNIMOG and
Those who want to own a UNIMOG
some of us own 2 unimogs
The Comp MOG and The Yard MOG
Joined: 22 Sep 2009 Odometer: 13 Location: australia
Posted: Thu Mar 24, 2011 1:13 am Post subject:
The rear Shocker Rockers give us about 23 1/2 inchs of travel at the shocks which equals about 39 inchs at the tires thats with the other 3 tires on the ground which I'm about
Ya it is a bit of a birdnest under the bonnet I told my auto elect mate that I wanted it as simple as possible EG one ignition wire ! but because we are running daul voltage 12v ignition 24 v starter winch ect, thats what we got it was a lot neater than that but we have had to take the cab off a couple of times to replace the gearboxs cases that I busted
The air filters on the dash do look good but are loud when you have the foot down !!!!!!!!!!! __________________________________ There are 2 types of people in the World
Those who own a UNIMOG and
Those who want to own a UNIMOG
some of us own 2 unimogs
The Comp MOG and The Yard MOG
Joined: 06 Jun 2008 Odometer: 251 Location: Bishop Auckland
Posted: Sun Mar 27, 2011 9:40 am Post subject: Re: update on my mog
v8alligator wrote:
Hi All,
Here is a the latest picture of the finished artical. All ready for a trip to VOSA
I guess I'll have to go sign up for Benzworld to see that picture. __________________________________ Rob (Robotman) Taylor.
MonkeyMotorSport Big Dog Engineering
Joined: 02 Jan 2011 Odometer: 19 Location: Haslemere Surrey
Posted: Sun Mar 27, 2011 11:17 am Post subject: Re: update on my mog
RobotMan wrote:
v8alligator wrote:
Hi All,
Here is a the latest picture of the finished artical. All ready for a trip to VOSA
I guess I'll have to go sign up for Benzworld to see that picture.
Hi,
Didn't realise it would not display. Have updated the link so should now work. __________________________________ Atkinson Alligator Universal Carrier
Unimog 404
Land rover S11 3.9V8
Joined: 02 Jan 2011 Odometer: 19 Location: Haslemere Surrey
Posted: Sun Mar 27, 2011 7:28 pm Post subject:
dave404 wrote:
What's the number V43917 under the windscreen for?
I think it is a vehicle fleet number. it was under the paint and also had a pressed ali plate on the rear where the number plate should be. __________________________________ Atkinson Alligator Universal Carrier
Unimog 404
Land rover S11 3.9V8
Joined: 02 Jan 2011 Odometer: 19 Location: Haslemere Surrey
Posted: Sun Mar 27, 2011 7:31 pm Post subject:
mike97 wrote:
Very smart, I like that. Whats the vosa trip for, MOT?
mike
Hi Mike. Yeah VOSA trip is for first MOT. It has got to be inspected and plated then MOT.
The Inspection is because it has not been MOT in the UK before. I think I may not need to have it plated as it has the axle weights etc on the manufactures plate.
Should be a interesting day out as they dont know what to test for. __________________________________ Atkinson Alligator Universal Carrier
Unimog 404
Land rover S11 3.9V8
Joined: 29 Oct 2007 Odometer: 192 Location: Gloucestershire
Posted: Thu Apr 21, 2011 9:15 pm Post subject: Tip and Crane?
The challange was to keep it as a tipper and fit a crane to load it! I didnt want to move the body back and chassis mount because the current weight distribution is good and the departure angle steep.
I mounted the crane in the front corner of the bed and sandwiched the bed in 12mm plate.on the lower plate I fitted an ordinary 50mm towball and fitted a free swinging hydraulic jack leg. A pneumatic bed lock was fitted to the opposite side to stop the bed twisting.
I did 6 two ton loads of hardcore in tip mode last week and loaded some reasonable timber in crane mode this week.............seems to work! __________________________________ Never mistake the edge of your rut for the horizon.........
Posted: Thu May 10, 2012 6:07 pm Post subject: i have just got myself a unimog 404
hi i live in sussex and i have recently got myself a unimog 404 it is great ,she has 2 speed crawler gears ,pto,a nissan 2.8 t diesel engine fitted ,i am having a roll cage made and fitted at the mo so i will put up some picks when that is done ,well hi all any way
The one which went up on eBay a week or so back with the non standard front wings. Unimog ownerships a small world. If you pop over to benzworld and look at the signature of any post of mine I'm hosting the full workshop manual, feel free to download it.
Posted: Thu May 10, 2012 6:50 pm Post subject: I see now
Yes you are correct that is the one ,I have changed the exhaust so not so noisy and having cage made I just need to sort power steering as well then it's play time I will message you through the merc world site regards Steve
All times are GMT - 12 Hours Goto page Previous1, 2, 3, 4, 5
Page 5 of 5
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can post calendar events in this forum