View previous topic :: View next topic |
Author |
Message |
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Sun Apr 15, 2012 7:50 pm Post subject: Jimny - brembo brake package, worth having?
|
|
|
Hi guys,
Time for a pad and disc change, I see on ebay a lot of brembo disc and pads, what are your thoughts? £65 all in, seems like good value to me, could be wrong? any experiences of these?
Cheers
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
|
scut44 Guest
|
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
|
Back to top |
|
|
mlines Off-Road Guru
Joined: 12 Sep 2002 Odometer: 1467 Location: Reading, Berks
|
Posted: Mon Apr 16, 2012 7:27 am Post subject:
|
|
|
Of course you need to take care when buying these sorts of things because of fakes etc.
Not only that but they don't say in either of the adverts linked to that they will not fit all Jimnys.
The first link does not say anything at all.
The second link gives a clue by saying that the centre is 107mm
There are two fitting for Jimnys - 107mm and 108.3mm
107mm fits up to VIN xxxxx203804
108.3mm fits from VIN xxxxx2038805 onwards.
Martin
__________________________________ SUZUKI MEET - 19th October 2014 - Borden, Hants
See www.bigjimny.com |
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Mon Apr 16, 2012 8:41 am Post subject:
|
|
|
I was nervous that they could be fake, £65 seems cheap for Brembo stuff? having said that, I guess they are just solid discs, nothing too fancy? what would you guys fit?
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
Twiss Mud Obsessed
Joined: 18 Feb 2008 Odometer: 6438 Location: Birkirkara, Malta
1993 Suzuki Samurai
|
Posted: Mon Apr 16, 2012 8:45 am Post subject:
|
|
|
For my SJ, a set of pads is £18 and a set of discs it £30, so £65 is a bit more expensive... but maybe not for a Jimny?
__________________________________ Twiss
'95 Samurai 416 16v
'92 Maruti Gypsy MG410
www.suzukiclubuk.co.uk |
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Mon Apr 16, 2012 9:01 am Post subject:
|
|
|
might just go and exercise my trade card in Halfords its not a racing car..
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
scut44 Guest
|
Posted: Mon Apr 16, 2012 9:08 am Post subject:
|
|
|
I would check out your local Motor Factor for the price of Discs and pads.
eg
Jimny Air Filter at Halfords is around £17 & around £6 from a Motor Factors.
Can the discs not just get a Skim at a Local Mechanical Engineers or a Garage for around £15 for the pair?
george
.
|
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Mon Apr 16, 2012 9:20 am Post subject:
|
|
|
scut44 wrote: | I would check out your local Motor Factor for the price of Discs and pads.
A Jimny Air Filter at Halfords is arounf £17 & around £6 from a Factors.
Can the discs not just get a Skim at a Local Mechanical Engineers or a Garage for around £15 for the pair?
george
. |
Never realised they would do that to discs! halfords prices are terrible, the trade card is great but you never know what you will save, I bought 2pairs of pads from there, £20+ on the shelf, one pair worked out at £8something, the other £6something bought wipers that worked out at a massive saving of about 60%, wipers for the landy are about £1.60 each! I thought great! Ill buy a set for the astra my G/F had at the time, £25 on the shelf so expected to pay about a tenner - about £23 at the tills!!
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
parrotveasey81 Mud Obsessed
Joined: 13 Feb 2009 Odometer: 7480 Location: bradford on avon (wiltshire)
|
Posted: Mon Apr 16, 2012 5:29 pm Post subject:
|
|
|
scut44 wrote: | I would check out your local Motor Factor for the price of Discs and pads.
eg
Jimny Air Filter at Halfords is around £17 & around £6 from a Motor Factors.
Can the discs not just get a Skim at a Local Mechanical Engineers or a Garage for around £15 for the pair?
george
. |
apart from most place's would charge alot more than that to skim disc's its just not worth it when disc's are cheap in the first place
http://www.eurocarparts.com/brake-disc
__________________________________ http://www.bloodredoffroad.com/
Angry parrot fabrications,check me out on Facebook |
|
Back to top |
|
|
|
scut44 Guest
|
Posted: Mon Apr 16, 2012 5:54 pm Post subject:
|
|
|
Cheap buy f you need the £25 ones,
not so cheap if its the £60 discs.
Many many garages are skimming discs almost as a matter of course at service time.
(just another cash raiser these days i think as modern discs look rusty after just a few days of sitting)
Had 2 pairs done just this last few weeks and the place i use,
but it is always an apprentice that is put on them and it is under £20 including VAT.
Obviously not worth having done on the cheap Discs but worth pricing locally if it is just the usual edge on Jimny discs IMO.
Whats the harm in asking locally.
george
.
|
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Mon Apr 16, 2012 7:38 pm Post subject:
|
|
|
scut44 wrote: | Cheap buy f you need the £25 ones,
not so cheap if its the £60 discs.
Many many garages are skimming discs almost as a matter of course at service time.
(just another cash raiser these days i think as modern discs look rusty after just a few days of sitting)
Had 2 pairs done just this last few weeks and the place i use,
but it is always an apprentice that is put on them and it is under £20 including VAT.
Obviously not worth having done on the cheap Discs but worth pricing locally if it is just the usual edge on Jimny discs IMO.
Whats the harm in asking locally.
george
. |
No harm in asking, I've had drums machined in the past.
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
mnl Articulating
Joined: 10 Nov 2001 Odometer: 826 Location: West Midlands
|
Posted: Mon Apr 16, 2012 9:26 pm Post subject:
|
|
|
I fitted Apec discs & pads to mine, were about £50 the set work ok.
Apec is a motorfactors top quality brand, that used to be the cheapest you could get, a bit like Regatta clothing that went from market stalls to almost a designer label.
The brembos sound the right price to me.
£20 to reface a pair of discs is a good price, I wouldn't do it for that, just watch they don't get too thin.
|
|
Back to top |
|
|
Suzukirama Just got MTs
Joined: 10 Apr 2009 Odometer: 138 Location: Wiltshire
|
Posted: Mon Apr 16, 2012 10:19 pm Post subject:
|
|
|
Buy whatever is cheapest. They all have to conform to a standard, and I doubt for that price that they'll be any better than your bog standard pads and discs.
|
|
Back to top |
|
|
gords1001 Mud Obsessed
Joined: 12 Dec 2006 Odometer: 2853 Location: astley
|
Posted: Tue Apr 17, 2012 6:35 am Post subject:
|
|
|
Skimming disks?
__________________________________ if you cant do it you can guarentee some ******
you know will do it in ten minutes but he`s busy! |
|
Back to top |
|
|
scut44 Guest
|
Posted: Tue Apr 17, 2012 7:50 am Post subject:
|
|
|
www.skimmydiscs.co.uk/resurfacing.html
What you have never had it done ,or bought a car or bike that it was already done on.
(you might be surprised how often it is done in the car trade then. )
Obviously shagged discs should be replaced, but i bought a 18 month old car with under 5000 miles on it and the first service shows
'front and rear discs grooved & corroded', (vented discs that have sat outside during a winter then been used)
the warranty did not allow for replacement & they got re-faced and are perfect.
There was no need for the discs to be replaced then, and i will replace them next time when they need doing.
The car is under a 3 year warranty & there is no problem with this having been done as the dealership does it on many Used/ex demo cars before re-sale.
george
This might not show as taken on the phone.
mileage 4614.
|
|
Back to top |
|
|
Masseyboy89 Gate Opener
Joined: 12 Apr 2012 Odometer: 36
|
Posted: Tue Apr 17, 2012 4:47 pm Post subject:
|
|
|
I ended up at the motor factors and bought some 'blue print' or something like that pads and discs. I am nervous of fake and cheap brake parts after an incredibly bad experience with a brake servo on my landrover that caused a complete brake failure. It was fitted for 3miles.
__________________________________ Simon
Defender 90 300TDI van
and a nice collection of military vehicles to fix when the defender is working. |
|
Back to top |
|
|
mcjimny Just got MTs
Joined: 25 Aug 2008 Odometer: 265 Location: Cambs/Lincs
|
Posted: Tue Apr 17, 2012 7:19 pm Post subject:
|
|
|
If they're skimmed within the wear thickness tolerances i don't see the issue, its not like its a new money saving idea! BITD everything was machined, skimmed etc.etc
Pattern parts from the factors are fine usually, i've used the apec efforts in the past and had problems with the pads hardening and discs warping. I have the discs fitted to my ST170 with ferodo pads and they're fine apart from a bit of fade under hard use. I've used the blueprint stuff for other parts and so far not had any issues.
__________________________________ BIG JIMNY :- http://www.bigjimny.com/ |
|
Back to top |
|
|
|