Discovery I rear seat belt mounts

mrcheese · Mud Obsessed Joined: 14 Oct 2003 Odometer: 6339

For the rear three seats I need the following bits.

The bolts that go through the floor.
The eye bolts that fit to the bracket under the floor and connect to the chassis mounts.
I may be able to salvage the old brackets, but may need them as well.

I had to cut them all out when I removed the boot floor as they were badly corroded and stuck.

Not had much luck loooking on line.

naughtyboy · Posted: Mon Feb 28, 2011 5:41 pm Post subject:

have got some on rangy chassis we are using for scouts project.
if you can give me till weekend will try to get them off for you.
you will need to drill out the old bolt that goes through the floor.

mrcheese · Mud Obsessed Joined: 14 Oct 2003 Odometer: 6339

Thanks for your help. I need to drill out the top bolts on mine (or remove the captive nut. It is just held in place with a blob of weld) so don't go to the trouble.

If you just have the eye bolts to the chassis that would be great.

No hurry, lots of welding to do before it goes for the MoT!

I have emailed Dunsfold this eveing so if I get a result I'll let you know so as not to waste your time.

If I buy a new bolt does anyone know what grade to use? No markings on the old domed top one.

mrcheese · Mud Obsessed Joined: 14 Oct 2003 Odometer: 6339

I dont suppose you have the belts to go with these?
Not the uppers, but bits with the lower locks on that fit to the floor.
Mine are in poor condition.

muddy milo · Posted: Mon Feb 28, 2011 9:07 pm Post subject:

ive got the belt clip brackets and possibly the bolts but thats all if thats any help

naughtyboy · Posted: Mon Feb 28, 2011 9:35 pm Post subject:

got the eye bolts had quick look and bolts are out of brackets so wont need drilling. must have been thinking of ones on mates d1.
no seatbelts though

let me know what you want and where to send em.

mrcheese · Mud Obsessed Joined: 14 Oct 2003 Odometer: 6339

That's geat. Many thanks naughtyboy.
I'll send you a pm.

crazymac · Posted: Tue Mar 01, 2011 9:59 pm Post subject:

When I did mine the only place I could find them was the main stealer!

Have you looked at Wizardbilt on ebay?

bigplum · Posted: Fri Mar 04, 2011 10:43 pm Post subject:

all seat belt bolts are a odd/funny thread to stop wrong fittings being used ,( may have changed on later stuff) but its easy to find them in scrapyards