Bits wanted for my 1973 Polycab Hafi

Ranger 1

Has anybody any of the following they might be prepared to part with, or could point me at likely sources please?

12" steel wheels

Headlights (think these are 5" either sealed beam or lenses and reflectors separate)

Wing mirrors and glasses both sides

Thanks

The Original Donk · Posted: Mon Jun 22, 2009 6:32 pm Post subject:

Hi

(is it nigel? you bought haffy towbar off me?)

I bought two new 5 3/4 inch headlights with built in side light from a place in cleckheaton for £18.00. have a search on ebay shops for bolt on bits

Regards, Chris.

Ranger 1 · Posted: Tue Jun 23, 2009 5:13 pm Post subject:

Hi, Chris, yes you got me. I thought the lights were only 5". I got some new refelectors and I am sure they only measure 5" or at most 5.5".

The American option was a Lucas sealed beam unit but the part number is no longer listed and mine has lights which are made up of lots of separate bits. I don't suppose it would be difficult to change to a sealed beam unit, but remember, mine is a polycab so might be different.

Next job is to get them out. The bolts are all rusted so it probably wont take long, they will just snap off. Then I can measure everything properly.

I've got the brakes done, they have come up a treat, so at least it stops, and the handbrake is really solid too.

Cheers

Nige

wildside · Posted: Wed Jun 24, 2009 3:21 pm Post subject: Haffy wheels

fso polonez wheels will fit hope this helps you know what to look for then.

The Original Donk · Posted: Thu Jun 25, 2009 9:36 pm Post subject:

umm, I hope I didnt mismeasure, I've since moved my front panel elsewhere and not fitted them for size into the hole. only comparison was with the old headlamp, which disintigrated in my hand!

Nathaniel · Posted: Fri Jun 26, 2009 9:21 pm Post subject:

Hi Nige, is it the standard wheels you need?

I have LOADS...

PM me.

swblandy · Posted: Sun Nov 08, 2009 10:05 am Post subject:

If I mind correctly (had 2 haffies years ago )the lights are 5 1/4 inch which early BMW 3 series used if I am. Wrong and they are 5inch then fiat 500 lights will fit