View previous topic :: View next topic |
Author |
Message |
danie_jc Gate Opener
Joined: 24 Nov 2007 Odometer: 20
|
Posted: Mon Jul 21, 2008 1:16 pm Post subject: Trailer wiring - help needed - now solved
|
|
|
OK - I'm trying to wire in the nato plug on the back of my mog and have come across some problems trying to identify what goes where. I hope that I am patching to the right place - the junction/splitter box at the back of the mog that has 8 connectors in a yellow case. From what I can work out there are 7 wires going in color coded as follows from the top going down:
1) White wire with green stripe x2
2) Black wire with yellow and blue stripes
3) Black wire with Red and White stripes
4) Black wire with green and red stripes
5) White wire with black stripe
6) White wire with red stripe
7) Black wire with red and yellow stripes
Not connected
Now then - what are these wires and what pins do I need to connect them to on my 12 pin nato socket(I'm assuming all sockets are wired in a standard way?)? Some of the wires on the socket are the same colour with the white wires being the exception - do I want to match the wire colours? If so, then what to connect the two white wires to? Or does anyone know what these wires are?
Last edited by danie_jc on Mon Aug 04, 2008 4:48 pm; edited 1 time in total |
|
Back to top |
|
|
|
danie_jc Gate Opener
Joined: 24 Nov 2007 Odometer: 20
|
Posted: Sun Aug 03, 2008 4:21 pm Post subject:
|
|
|
OK - managed to sort it myself eventually
I now have a working trailer - yippee
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can post calendar events in this forum
|
|
|